TORQUE WRENCHES Computorq II TM Largest Storage Capacity Available Up to 4000 torque values can be stored in memory. An audible tone signals when memory is full. Down Loading Capability Computorq II is equipped to download individual torque values or store values in memory which can be directly downloaded to a printer/computer datalogger via RS232. Selectable Modes of Operation "Peak Hold" and "Track" modes of operation are standard. Computorq II's electronics are far superior in capturing real torque value in "Peak" mode. Easy Set-Up Target torque values (high and low percentage, ± tolerances and torque engineering units) are easily programmed through the keypad and shown on the LCD. Quality Construction Proven industrial quality. Designed for continuous use. Range Available from 5 in. lb. to 1000 ft.lb. Batteries A 9V alkaline battery is standard and provides enough power for 60 hours of operation. A "LO BAT" indication on the display signals for replacement. Accuracy ±1% From 20-100% of scale. ±1%, plus 5 increments, from 10-20% of scale. Calibration Data All calibration data is stored in the microprocessor. Baud Rate The baud rate for downloading to a printer/computer/data logger is selectable. The factory set rate is 1200. Options are 300,600,1200, 2400,4800, 9600 or 19,200. PART No DRIVE RANGE INCREMENTS LENGTH IN. 501Cl-Il 1/4" 5-50 in. lb. 5.6-56 dNm 5.7-57 cmkg 80-800 in. oz. 0.01 in. lb. 0.01 dNm 0.01 cmkg 0.1 in. oz. 13.5" 2502CI-ll 3/8" 25-250 in. lb. 28-282 dNm 29-288 cmkg 0.1 in. lb. 0.1 dNm 0.1 cmkg 14.9" 502CF-II 3/8" 5-50 ft. lb. 68-677 dNm 69-691 cmkg 60-600 in. lb. 0.01 ft. lb. 0.1 dNm 0.1 cmkg 0.1 in. lb. 14.9" 2503CF-ll 1/2" 25-250 ft. lb. 34-338 Nm 3.4-34 mkg 0.1 ft. lb. 0.1 Nm 0.01 mkg 21.5" 6004CF-Il 3/4" 60-600 ft. lb. 81-813 Nm 8.3-83 mkg 0.1 ft. lb. 0.1 Nm 0.01 mkg 46.5" I0005CF-ll 1" 100-1000 ft. lb. 135-1355 Nm 14-138 mkg 0.1 ft. lb. 0.1 Nm 0.1 mkg 74.0" The ranges listed above are for reference, as most of the torque engineering units can be selected through the keypad: ft.lb., in.lb., in.oz., Nm, dNm, Mkg, and cmkg. Return to top of page
	Hare Industrial Products Pty Ltd ABN: 59 066 550 883 21 Craigielea Avenue, St Albans, Victoria, 3021, Australia Phone: +61-3-9366 3693 Fax: +61-3-9367 8188 E-Mail: sales@hare.com.au