ELECTRONIC TORQUE CALIBRATOR DIGITEST 950-DT Digitally calibrates all torque tools including power tools. Accuracy better than 0.25% of indicated value (10-100% of transducer range). Full easy-to-read alphanumeric display. Automatic recognition of up to 15 transducer ranges. Automatic sensing of active transducer by internal coding. RS-232C port standard. Easy selection of 7 different torque units. Sealed chemical resistant membrane keypad. Quick and easy calibration from front keyboard. Durable high impact case with reinforced bail handle. Complete digital microprocessor based circuitry. Super fast Power Tool mode to be used with joint simulator. Pulse type air tools not recommended. Peak mode both clockwise and counterclockwise. First Peak mode for "click" and clutch type tools. Track mode. Super twist LCD display - view at any angle. Easy calibration mode with instructions via alphanumeric display. Bail handle and two 9 volt batteries makes unit portable. Match with any Digitest torque transducer. Match with almost any brand torque transducer, including rotary transducers. Lightweight - only 3.5 lbs. Accepts any load cell output at 2 or 3 mV/V. AC power for standard 110/220 volt. DIGITEST TRANSDUCER OPTIONS Contact us for more details SINGLE TRANSDUCERS TRANSDUCER PART No. SQ. DRIVE IN.OZ. IN.LB. FT.LB. 1001-O-TTP 1/4" 10-100     2001-O-TTP 1/4" 20-200     4001-O-TTP 1/4" 40-400     501-I-TTP 1/4"   5-50   1001-I-TTP 1/4"   10-100   2502-I-TTP 3/8"   25-250   4002-I-TTP 3/8"   40-400   7502-I-TTP 3/8"   75-750   10002-I-TTP 3/8"   100-1000   1253-F-TTP 1/2"   12.5-125 2503-F-TTP 1/2"   25-250 6004-F-TTP 3/4"     60-600 1000-F-TTP Flange mount   100-1000 2000-F-TTP Flange mount     200-2000 MULTIPLE TRANSDUCERS TTPM-41 (4 IN 1) 1/4"   5-50   3/8"   25-250   3/8"   100-1000   1/2"     25-250 Return to top of page
	Hare Industrial Products Pty Ltd ABN: 59 066 550 883 21 Craigielea Avenue, St Albans, Victoria, 3021, Australia Phone: +61-3-9366 3693 Fax: +61-3-9367 8188 E-Mail: sales@hare.com.au