The 90222 is a portable Process Monitor and Control Instrument designed to work with our Auto-ID transducers for Plug and Play operation. The PMAC 2000 is also directly compatible with any non Auto-ID strain gauge based transducers.

This versatile instrument is designed for:

• Measuring force, torque, pressure, or displacement
• Capturing and storing mu" peaks
• High speed recording of measurement profiles vs. time
• It now Includes optional simultaneous Angle or RPM measurements
• Control of remote devices

• Continuous process monitoring (tracking)
• 3 peak recording functions
• 2 record functions (with multiple sampling rates from 1 Hz to 10 kHz and storage for up to 8,000 data points)
• 3 process control output signals (for High, Low, and Target occurrences)
• RS232 output
• Storage Capability for up to 8,000 peak readings
• 4 log operation functions (viewing, uploading, printing, and erasing)
• Automatic Plug and Play calibration with SDI's strain gauge based Auto-ID sensors
• Selectable engineering units
• Menu locking feature
• Automatic power-down (when Sensor is not plugged in)
• Rechargeable Ni-Cad batteries
• Works with all full bridge strain gauge based transducers
• Graphic User interface software available
• Optional simultaneous angle or RPM measurements

• Digits: 4 (5 w/no decimal)
• Height of digits: 0.25"
• Sampling rates
• Track: 4 Hz
• Peak: 5 kHz
• Record: selectable up to 10 kHz
• Frequency response: (-3 dB) at 1000 Hz
• Accuracy: max error = 0.05% of F.S
• Sensor interface
• Max input and F.S.: ± 4.5 mV/V
• Polarity: Bipolar
• Bridge excitation: 7 V supplied
• Minimum bridge impedance: 120
• Data output: RS-232 port ASCII, 9600 baud, 8-N-1
• Control/limit outputs: Open collector
• Analog output: 0-2.4 Vdc (1Vdc@2 mV/V)
• Dimensions: 6.0W x 8.0D x 1.75H
• Power
• AC (adapter supplied)
• Batteries: 9.6 V internal/rechargeable